ГОСТ ISO 10844-2017 Акустика. Требования к испытательным трекам для измерения шума, излучаемого дорожными транспортными средствами и их шинами

[1]

ISO 565 Test sieves - Metal wire cloth, perforated metal plate and electroformed sheet - Nominal sizes of openings

[2]

ISO 10844:1994 Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles

[3]

ISO 13325 Tyres - Coast-by methods for measurement of tyre-to-road sound emission

[4]

EN 933-5 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles

[5]

EN 933-6 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates

[6]

EN 13043 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas

[7]

EN 13108-1 Bituminous mixtures - Material specifications - Part 1: Asphalt concrete

[8]

EN 12591 Bitumen and bituminous binders - Specifications for paving grade bitumens

[9]

EN 1367-1 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing

[10]

EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value

[11]

EN 12697-30 Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor

[12]

EN 13286-47 Unbound and hydraulically bound mixtures - Part 47: Test method for determination of California bearing ratio, immediate bearing index and linear swelling

[13]

AASHTO MP2. Standard specification for super pave volumetric mix design. American Association of State Highway and Transportation Officials, Washington, D.C., 2001

[14]

AASHTO T 96. Standard method of test for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine. American Association of State Highway and Transportation Officials, Washington, D.C., 2002

[15]

AASHTO T 176. Standard method of test for plastic fines in graded aggregates and soils by use of the sand equivalent test. American Association of State Highway and Transportation Officials, Washington, D.C., 2002 ASTM E 1926-98, Standard Practice for Computing International Roughness Index of Road from Longitudinal Profile measurement

[16]

ASTM D 698-00, Standard test methods for laboratory compaction characteristics of soil using standard effort

[17]

ASTM D 1559-89, Test method for resistance to plastic flow of bituminous mixtures using marshall apparatus

[18]

ASTM D 1883-99, Standard test method for CBR (California Bearing Ratio) of laboratory-compacted soils

[19]

"Handleiding voor de bereiding van bitumineuze mengsels", Aanbeveling A72/02, edited by Belgian Road Research Centre (2002)

[20]

"Handleiding voor de formulering van bitumineuze mengsels" ("Guidance forthe formulation of bituminous mixtures"), Belgian Road Research Centre, A69/97, Brussels (1997)

[21]

Manual for asphalt pavement. Japan road association, 1989, additional information can be obtained from www.road.or.jp/english/index.html

[22]

Klein P., & Hamet J.-F. "ENDt-Expected pass-by Noise level Difference from Texture level variation of the Road Surface", Technical Report SILVIA-INRETS-021-00-WP2-25/05/05, INRETS, 2005, can be downloaded from SILVIA website: www.trl.co.uk/silvia

[23]

Nies V., "ISO 10844 WG TT2 Test track construction, Recommendations for construction, mix design, process control", Phoenix, October 2004 (with update of March 2005)

УДК 534.322.3.08:006.354

МКС 43.020

         17.140.30

IDT

Ключевые слова: испытательный трек, шум, шины, дорожное покрытие, кривая гранулометрического состава, уровень звукового давления, коэффициент звукопоглощения